IGS 100KW (Prime) enclosed genset
IDMS offers a full line of custom-built diesel generators for in-plant and industrial/construction applications ranging from 45KW to 1MW.
These generators are available as "Open", "Mobile" or "Stationary" designs depending on the application & installation requirements. These gensets are typically diesel engine powered, EPA Tier 3 rated for high-voltage electrical loads for standby and prime power applications via customer specified power cable/breaker connections.
This unit is locally operated with the digital genset control system.
The unit shall be capable of operating in temperature ranges of 0 to 120 F
Description:
The above unit shall be fully assembled, unitized, and completed to the customer's specifications.
Note: If these items are already detailed above, they shall not be duplicated.
This shall include the following items:
- Installation of all other electrical systems
- Installation of all hydraulic systems
- All steel and miscellaneous fittings to complete the unit
- All labor to complete unit
- Workmanship should be a good quality and appearance. Following is partial list of examples:
- Flame cut edges shall be ground smooth.
- Sharp corners and edges to which operators and mechanics are vulnerable shall be ground smooth.
- Bolt holes for bolts shall be drilled (not torch cut) no more than 1/8" larger than the bolt it accepts
- Welds shall be of good quality and of sufficient strength.
- Use self-locking nuts where applicable
- All hoses will be well supported with support type clamps
- No sweated or brazed type hydraulic fittings will be used
- All hose assemblies will have swivel ends.
- All hoses will be protected by well-secured rubber sleeves to prevent rubbing by frame, (as required)
- All reservoirs to be constructed of steel plate with sight level gauge, cleanouts, and vent fill cap, ect.